Dr. Galv is a technical resource designed to provide answers to your technical and specifying questions. Popular topics and questions are available, below. Click a topic to begin.
Have a question of your own you’d like answered? .(JavaScript must be enabled to view this email address)
Members, looking for member only Dr Galvs or other technical resources? Click here to access member content.
ASTM and Other Specifications
Return to Dr. Galv Topics List
- A 153 Question Specifications (1994)
- A 239 - Preece Test (1994)
- A 490 Bolts (1993)
- A 780 Repair Thickness (2001)
- AISC Specification - A 572 (1997)
- Are ASTM A123 and G90 equivalent galvanizing specifications? (2013)
- ASTM A 123 for Threaded Studs (1993)
- ASTM A 767/A 767M Appendixes (2011)
- ASTM A 780 (1993)
- ASTM A 780-Zinc Dust in Paint (2010)
- ASTM A123 Equivalencies (2011)
- ASTM Specification Changes (2009)
- BS 729 (1994)
- Chromate Quenching (2011)
- Cracking in the Heat Affected Zone (2009)
- Damaged Galvanized Steel and Storage (2004)
- Difference between G90 and A 123 Coating (1997)
- Dull Gray vs. Shiny Finishes (2008)
- Fastener Specifications (2008)
- G185 Coating and Pressure-Treated Wood (2004)
- G90 (1994)
- Galvanized Bolts - Nut and Clearance Hole Size Allowance (2002)
- Galvanized Steel Sheet Specs (1994)
- Handling Markings on Hot-Dip Galvanized Coatings (2007)
- Inclusions on the Galvanized Coating (2009)
- Inspection of Products - Coating Thickness Measurements (2001)
- ISO 1461 and ASTM A 123 (2002)
- Minimum Thickness A 123 (1994)
- Overtapping Allowances (2007)
- Preferred Repair Method Allowed by A 780 (1993)
- Revision to A 123 Specification (1997)
- Rough Coatings on Boat Trailers - Silicon and Phosphorus (1996)
- Rust Bleeding on Overlapping Surfaces (2008)
- Rust Bleeding on Welded Parts (2008)
- Sampling Protocols to Ensure Proper Zinc Coating Thickness (2006)
- Sizing Clearance Holes for HDG Fasteners (2009)
- Slip Coefficient of Fasteners (1998)
- Specifying Galvanized Structural Pipe and Tube (2012)
- Thinner Galvanized Coatings (2011)
- Touch-Up and Repair (2000)
- Trouble Shooting Possible Coating Failure (2002)
- Vent and Drain Hole Plugs (2012) <
