Zinc Coatings
Is there concern about galvanic corrosion when different types of zinc-coated steel are in contact?
There is not a concern of dissimilar metals corrosion (galvanic corrosion) when pairing zinc-coated steel of different types (for example when pairing a hot-dip galvanized
Is it possible to have steel with chemistry that is too good for galvanizing?
It is possible to have steel chemistry with levels of silicon and phosphorus that are too low to meet the minimum thickness levels specified in
Why is lead added to the galvanizing bath?
This article is exclusive to members. To view members-only articles, please log in. Not a member? Join the AGA.
Members Only
Zinc Based Solders
Soldering with zinc-based alloys is achieved by applying zinc alloy in either a stick or powder form. The area being repaired needs to be preheated
Zinc Spraying (Metallizing) Production Process
Zinc spraying, or metallizing, is accomplished by feeding zinc in either wire or powder form into a heated gun, where it is melted and sprayed
Electrogalvanizing Production Process
Electrogalvanized coatings are applied to steel sheet and strip by electrodeposition. Electrogalvanizing is a continuous operation where the steel sheet or strip is fed through
Coating Characteristics of Zinc Spraying (Metallizing)
The sprayed zinc coating is rough and slightly porous, with a specific gravity of 6.4, compared to zinc metal at 7.1. Zinc corrosion products tend to fill
Coating Characteristics of Mechanical Plating
Mechanical plating consists of a flash coating of copper followed by the zinc coating. Coating thickness requirements contained in ASTM Specification B 695 range from 0.2 to 4.3
Coating Characteristics of Zinc Plating
Normal zinc-plated coatings are dull gray with a matte finish, although whiter, more lustrous coatings can be produced, depending on the process or agents added
Coating Characteristics of Continuous Sheet Galvanizing
After galvanizing, the continuous zinc coating is physically wiped using air knives to produce a uniform coating across the width of the strip. The uniform
